кодом ДК 021:2015 - 33180000-5 Апаратура для підтримування фізіологічних функцій організму (код НК 024:2019 43571 Протез стопи багатовісний, 41152 Гільза приймальна для транстібіального протеза, 41546 Протез при виокремлення тазостегнового суглоба, 41541 … Ще Протез при видаленні колінного суглоба, 43795 Механічний поліцентричний колінний протез)

Безшарнірні штучні стопи

code NC 024:2019 43571 Multi-axis foot prosthesis, An artificial substitute for a foot designed as a component of an external lower-limb prosthesis to restore some of the appearance and/or function of the normal anatomy. It typically consists of moulded plastic with an exterior in the form of a natural foot, and is constructed to permit ankle movement in three planes to accommodate uneven terrain and to absorb torques that would otherwise produce shearing forces on the residual limb. A multi-axis foot is typically intended for an active patient engaged in activities involving much foot movement (e.g., hiking, golfing, dancing).

Безшарнірні штучні стопи

code NC 024:2019 43571 Multi-axis foot prosthesis, An artificial substitute for a foot designed as a component of an external lower-limb prosthesis to restore some of the appearance and/or function of the normal anatomy. It typically consists of moulded plastic with an exterior in the form of a natural foot, and is constructed to permit ankle movement in three planes to accommodate uneven terrain and to absorb torques that would otherwise produce shearing forces on the residual limb. A multi-axis foot is typically intended for an active patient engaged in activities involving much foot movement (e.g., hiking, golfing, dancing).

Безшарнірні штучні стопи

code NC 024:2019 43571 Multi-axis foot prosthesis, An artificial substitute for a foot designed as a component of an external lower-limb prosthesis to restore some of the appearance and/or function of the normal anatomy. It typically consists of moulded plastic with an exterior in the form of a natural foot, and is constructed to permit ankle movement in three planes to accommodate uneven terrain and to absorb torques that would otherwise produce shearing forces on the residual limb. A multi-axis foot is typically intended for an active patient engaged in activities involving much foot movement (e.g., hiking, golfing, dancing).

Косметична оболонка

code NC 024:2019 41152 Transtibial prosthesis socket, A device that fits over the terminal end of a residual lower limb and serves as an interface between the body and a prosthesis for transtibial (below-the-knee) amputation.

Тазостегновий вузол

code NC 024:2019 41546 Hip-disarticulation prosthesis, A preassembled artificial replacement for the lower limb designed to restore some of the appearance and/or function of the normal anatomy after amputation at the hip joint or in cases of limb deficiency at birth. The assembly includes an artificial thigh, knee, shank, ankle, and foot. .

Модульний поліцентричний колінний вузол

code NC 024:2019 41541 Knee-disarticulation prosthesis, An artificial substitute for a disarticulation amputation at the knee joint, or used in cases of limb deficiency at birth, designed as a component of an external lower-limb prosthesis to restore some of the appearance and/or function of the normal anatomy. It is typically made of metal and plastic and is typically constructed as a polycentric hinge that incorporates an upper joint section that fits against a full-length prosthetic femur. It is typically spring-assisted to control the swing of the leg. .

Модульний моноцентричний колінний вузол з тормозним механізмом

code NC 024:2019 41541 Knee-disarticulation prosthesis, An artificial substitute for a disarticulation amputation at the knee joint, or used in cases of limb deficiency at birth, designed as a component of an external lower-limb prosthesis to restore some of the appearance and/or function of the normal anatomy. It is typically made of metal and plastic and is typically constructed as a polycentric hinge that incorporates an upper joint section that fits against a full-length prosthetic femur. It is typically spring-assisted to control the swing of the leg.

Моноцентричний колінній вузол

code NC 024:2019 41541 Knee-disarticulation prosthesis, An artificial substitute for a disarticulation amputation at the knee joint, or used in cases of limb deficiency at birth, designed as a component of an external lower-limb prosthesis to restore some of the appearance and/or function of the normal anatomy. It is typically made of metal and plastic and is typically constructed as a polycentric hinge that incorporates an upper joint section that fits against a full-length prosthetic femur. It is typically spring-assisted to control the swing of the leg.

Моноцентричний колінній вузол замковий

code NC 024:2019 41541 Knee-disarticulation prosthesis, An artificial substitute for a disarticulation amputation at the knee joint, or used in cases of limb deficiency at birth, designed as a component of an external lower-limb prosthesis to restore some of the appearance and/or function of the normal anatomy. It is typically made of metal and plastic and is typically constructed as a polycentric hinge that incorporates an upper joint section that fits against a full-length prosthetic femur. It is typically spring-assisted to control the swing of the leg.

Модульний моноцентричний колінний вузол з тормозним механізмом

code NC 024:2019 41541 Knee-disarticulation prosthesis, An artificial substitute for a disarticulation amputation at the knee joint, or used in cases of limb deficiency at birth, designed as a component of an external lower-limb prosthesis to restore some of the appearance and/or function of the normal anatomy. It is typically made of metal and plastic and is typically constructed as a polycentric hinge that incorporates an upper joint section that fits against a full-length prosthetic femur. It is typically spring-assisted to control the swing of the leg.

Модульний моноцентричний колінний вузол з тормозним механізмом

code NC 024:2019 41541 Knee-disarticulation prosthesis, An artificial substitute for a disarticulation amputation at the knee joint, or used in cases of limb deficiency at birth, designed as a component of an external lower-limb prosthesis to restore some of the appearance and/or function of the normal anatomy. It is typically made of metal and plastic and is typically constructed as a polycentric hinge that incorporates an upper joint section that fits against a full-length prosthetic femur. It is typically spring-assisted to control the swing of the leg.

Чотирьохосьовий пневматичний колінний вузол

code NC 024:2019 43795 Polycentric mechanical knee prosthesis, An artificial substitute for a transfemoral (above-the-knee) and/or knee disarticulation amputation designed as a component of an external lower-limb prosthesis to restore some of the appearance and/or function of the normal anatomy. It typically consists of metal and plastic and is constructed as a multiple-axis joint rotation, mechanical hinge that incorporates friction adjustment and a simple swing control that permits variable walking speed. A common design, known as a “fourbar” knee, is very stable during early stance phase (beginning of a step), reduces the leg’s length when beginning a step lowering the risk of stumbling, and bends in the swing phase or when the user sits down.

Чотирьохосьовий пневматичний колінний вузол

code NC 024:2019 43795 Polycentric mechanical knee prosthesis, An artificial substitute for a transfemoral (above-the-knee) and/or knee disarticulation amputation designed as a component of an external lower-limb prosthesis to restore some of the appearance and/or function of the normal anatomy. It typically consists of metal and plastic and is constructed as a multiple-axis joint rotation, mechanical hinge that incorporates friction adjustment and a simple swing control that permits variable walking speed. A common design, known as a “fourbar” knee, is very stable during early stance phase (beginning of a step), reduces the leg’s length when beginning a step lowering the risk of stumbling, and bends in the swing phase or when the user sits down.

Поліцентричний колінний вузол

code NC 024:2019 41541 Knee-disarticulation prosthesis, An artificial substitute for a disarticulation amputation at the knee joint, or used in cases of limb deficiency at birth, designed as a component of an external lower-limb prosthesis to restore some of the appearance and/or function of the normal anatomy. It is typically made of metal and plastic and is typically constructed as a polycentric hinge that incorporates an upper joint section that fits against a full-length prosthetic femur. It is typically spring-assisted to control the swing of the leg.